Built for Bambu Lab A1 and A1 Mini
Turn a sliced 3MF into a loop-ready Floopr file.
Select your sliced Bambu 3MF and Floopr will inspect it locally, detect the printer, and calculate a safe auto push height before upload.
Upload your sliced 3MF
Floopr reads the file in your browser first. The original 3MF is only sent when you click Process & Download.
Detachment tuning
Choose how the print should release after each completed loop, then process the job.
Push mode pushes across the bed. Lift mode uses a higher lifting movement before release.
Slice limit is based on estimated generated 3MF size. Larger source files produce much larger looped files. To keep output under 500 MB, the maximum slices update automatically for the current file.
Choose how many times the processed print block should repeat.
Choose either temperature-based cooldown or a fixed time delay between loops.
Exceeding recommended temperature ranges can lead to severe adhesion issues, potentially damaging your build plate or preventing automated part removal.
Lower the bed until it reaches a release-friendly temperature.
Recommended: 25 - 30°C
Exceeding recommended temperature ranges can lead to severe adhesion issues, potentially damaging your build plate or preventing automated part removal.
Target bed temperature during printing. Lower values can help easier release.
Recommended: 60 - 65°C
Unlock additional detachment movement patterns for more stubborn prints. Preview two premium sweep modes here, then open the full sweep library.
Premium Unlocked (Testing)
Choose the song played by the printer when the entire loop sequence finishes. Premium melodies require an active subscription.
Adjust the first layer distance from the plate. Use very small values only.
Auto uses the tallest detected part height minus 10 mm. Switch to manual override if you want to force a custom value.
Auto value will appear after file analysis.
Finalising your file
Processing your configuration on our servers...
Building loop-ready file
0%
Applying your detachment and cooldown settings...
Success!
Your file is ready.
Your uploaded file has been processed. Download it directly below.
File name
floopr_output.3mf
Detected printer
A1 Mini
Loop count
5 copies
Preview is a visual representation only. Internal features or cavities may not be visible in this preview, but will remain intact in the processed G-code.